Overview:
TwinMOS Fully Buffered DIMM (FB-DIMM) technology is a new memory architecture that addresses the scaling needs of both capacity and bandwidth in enterprise platforms replacing earlier parallel-based systems. FB-DIMM provides significant capacity and bandwidth improvements over existing DDR-2 based systems. FB-DIMM also provides enhanced RAS capabilities, a key requirement for server platforms.
As with nearly all RAM specifications, the FB-DIMM specification was published by JEDEC. TwinMOS offers well-established FB-DIMM solutions to provide premium products and superior post-delivery services to customers.
• 240pin fully buffered dual in-line memory module
• 3.2Gb/s, 4.0Gb/s link transfer rate
• 1.8V +/- 0.1V Power Supply for DRAM VDD/VDDQ
• 1.5V +/- 0.075V Power Supply for AMB VCC
• 3.3V +/- 0.3V Power Supply for VDDSPD
• Buffer Interface with high-speed
• point-to-point Link at 1.5 volt
• Channel error detection & reporting
• Channel fail over mode support
• Serial presence detect with EEPROM
• Posted CAS
• Programmable CAS Latency : 3, 4, 5
• Automatic DDR2 DRAM bus and channel calibration
• MBIST and IBIST Test functions
• Hot add-on and Hot Remove Capability
• Transparent mode for DRAM test support
• Support ECC Function.
TwinMOS announcing TwiSTER Series DDR3 2133 to set again a new barrier for overclocking memory. TwinMOS not only enhances the bandwidth of the module to 17,000MB/sec but also sets users at the tip of the pyramid as the target customer group.
Based on the memory architecture evolution on Intel Core i7 and Core i5, TwinMOS raises the frequency of the TwiSTER DDR3 by 8% from 2000MHz to 2133MHz. Also, by continuing the high frequency and low latency tradition of the TwiSTER memory, the TwiSTER DDR3 2133 can fully display the configuration 9-10-9-24 (tCL-tRCD-tRP-tRAS) at a low operating voltage at 1.65V without sacrificing either performance or stability. All these have witnessed the extraordinary R&D capacity and capability of TwinMOS. In addition to the unchanged genuine chip policy, TwinMOS ensures chip quality with the exclusive sorting technology to screen chips. In order to further ensure the optimal performance and flawless quality of the TwiSTER DDR3 2133, TwinMOS applies the 24-hour burn-in test and industry-approved MemTest software to perform the QC inspection of all modules before shipping to assure the stability and exceptional performance of every TwiSTER DDR3 2133.
The TwiSTER DDR3 2133 from TwinMOS has a conventional 6-layered PCB design and is covered with the heat-sink labeled for the TwiSTER series.
Specifications
| Item | Specifications |
| PC Type | Desktop PCs |
| Module Specification | 240Pin Unbuffered DIMM Non ECC |
| IC Config | 256×8 |
| Capacity | 4GB Kit(2x2GB) |
| Data Transfer Bandwidth | 17000MB/sec (DDR3-2133) |
| CL-value | 9-10-9-24 |
| PCB Structure | 6-layer PCB |
| Extra features | Aluminum heat-sink (According to the actual products) |
| Working voltage | 1.65V |
| Warranty | Lifetime warranty |
The invention of the Intel X38 chipset has not only brought desktop PCs to enter the era of DDR3-1333 but also fulfilled the FSB clock requirements of Intel Core 2 Duo processors and enhanced the overall performance of Intel Core 2 Duo-based platforms. However, with rich R&D experience and how-how, TwinMOS even improved the speed of DDR3 modules to DDR3-1600 to bring over-clocking fans the joy of perfect performance and the TwinMOS TwiSTER DDR3 series a valiant fighter. Quality is the best policy. TwiSTER DDR3 1600 uses 128×8 BGA memory modules for up to 2GB capacity in a single stick of memory, which suitable for large memory situations such as 3D gaming. At the same time, the memory module is covered in the all-new aluminum heat spreader.
Specifications:
| Item | Specifications |
| PC Type | Desktop PCs |
| Module Specification | 240Pin Unbuffered DIMM Non ECC |
| IC Config | 128×8 |
| Capacity | 2GB |
| Data Transfer Bandwidth | 12800MB/sec (DDR3-1600) |
| CL-value | 9-9-9-24 |
| PCB Structure | 8-layer PCB |
| Extra features | Aluminum heat-sink (According to the actual products) |
| Working voltage | 1.60V |
| Warranty | Lifetime warranty |
Keeping abreast with the latest trend to launch high capacity products to replace the old, TwinMOS is now offering a new choice of superb value expansion with its 4GB DDR3 DIMM & SODIMM using Hynix die. High capacity DDR3 features outstanding product quality that users have come to expect from TwinMOS and the product has also passed the strictest tests for quality assurance. Not only that, TwinMOS’s 4GB DDR3 is manufactured with full compliance to the specifications prescribed by JEDEC (Joint Electron Device Engineering Council) and has gone through extensive burn-in tests. DDR3 features standard 240 Pin DIMM & 204 pin SODIMM design and operates on 1.5V of power to achieve low power consumption with a truly eco-friendly specification.
- DDR3 – 1333 U-DIMM – 4GB [9-9-9-24]
- DDR3 – 1333 SO-DIMM – 4GB [9-9-9-24]
Specifications:
| Item | Specifications |
| PC Type | Desktop / Laptop |
| Module Specification | 240Pin Unbuffered DIMM / 204pin SO-DIMM |
| IC Config | 60ball FBGA(256Mx8) – 16Chips |
| Capacity | 4GB |
| Data Transfer Bandwidth | 10664MB/sec (DDR3-1333) |
| CL-value | 9-9-9-24 |
| PCB Structure | 6-layer PCB |
| Working voltage | 1.5V |
| Extra Features | Aluminum heat-sink (According to the actual products) for DIMM |
| Warranty | Lifetime warranty |
Requirements:
Intel platform
- Intel G41, G43 & G45 series or later chipset
- Intel P35, P43, P45 series or later chipset
- Intel Q43, Q45 series or later chipset
- Intel X38, X48 series or later chipset
AMD Platform
- 8-Series Integrated Chipset:
- AMD 890GX Chipset
- 7-Series Discrete Chipset:
- AMD 790FX Chipset for Ultimate Gamers
- AMD 790X Chipset for Gamers
- AMD 770 for HD Enthusiasts
- 7-Series Integrated Chipset:
- AMD 790GX Chipset
- AMD 785G Chipset
- AMD 780V Chipset
- AMD 780G Chipset
- AMD 760G Chipset
- AMD 740G Chipset
“M.tec” – TwinMOS Value RMA series is ideal for those who purchase memory by spec and are looking for competitively priced generic memory that is 100% tested to meet industry specifications. This product will come with a new sticker to make sure the real identity. It will have a full range of Desktop & Laptop memory modules to satisfy customer demand.
Memory Module for Desktop PC:
| Description | Capacity |
| DDR3 240 pin U-DIMM [1333/1066 MHz] | 2GB & 1GB |
| DDR2 240 pin U-DIMM [800/667 MHz] | 2GB & 1GB |
| DDR 184 pin U-DIMM [400/333 MHz] | 1GB & 512MB |
Memory Module for Laptop:
| Description | Capacity |
| DDR3 204 pin SO-DIMM [1333/1066 MHz] | 2GB & 1GB |
| DDR2 200 pin SO-DIMM [800/667 MHz] | 2GB & 1GB |
| DDR 200 pin SO-DIMM [400/333 MHz] | 1GB & 512MB |